Tips for finishing cattle this winter

silage-2-684.384.jpg

Ross Brady, Beef Specialist with GAIN Feeds gives some sound advice this winter when finishing cattle.

One of the most important things is to ensure that stock are healthy at housing. This means that they are treated for lungworms beforehand. The housing environment should also be conducive to health where the air outlet in the shed is twice the air inlet.

Silage Analysis

It’s important to analyse silage from a quantitative and qualitative point of view. The results will give you an idea of the quality of the silage and what’s required to balance the diet to ensure sufficient performance levels are achieved. Having a clear view of the quantity of the silage will make sure you don’t run short over the winter. DMD is an important measure of the energy an animal can get from the silage. DMD will affect intake, as silage with a high DMD will be digested quicker, allowing more intake. High DMD values generally give high energy and protein levels.

Photo: Ross Brady, GAIN Feeds testing Cormac Kelly’s silage with the NIR4 scanner in Tubber, Co. Offaly.

Balancing Diets

Depending on whatever system you run it’s very important to balance the diet adequately. A compound feed may suit some farmer and a coarse ration may suit another to adequately balance their silage. On the other hand if a farmer is growing fodder beet or treating barley they may require a balanced blend or straights. It’s important to keep things simple as you don’t want to spend your entire day feeding cattle. In some cases putting all the smaller ingredients and minerals into a balancer blend might make the most sense. Using the Rumenade diet calculator, which was developed by Techna in France, all GAIN Feeds business managers can formulate the best diet to optimise returns for your individual system.

Performance Matters

The performance difference between a well-balanced bull finishing diet and a poorly balanced one can be 0.5Kgs/day and €192/hd (during the finishing period) bringing them from 500 to 700 Kg. When finishing steers on silage and concentrate, the performance drop per 1% DMD drop increases the cost per Kg of carcase by almost 7 cent. Each 1 unit decline in DMD requires 0.4 Kgs of concentrates to compensate

Using Feed Additives

On beef finisher diets, the need for improved feed efficiency cannot be overstated. While we have the capability to promote intakes in beef finishing diets, it is more important to improve the use of the existing diet, as there is a diet cost to increase intake. For this reason, GAIN Feeds have been using Carneo, an essential oil product from Techna to increase the feed conversion ratio. Carneo stimulates the ruminal flora and directs the VFA fermentation towards the production of propionic acid, especially favourable for muscle development and ensuring better energy efficiency. It also has an action to buffer rumen pH.”

NIR Silage Scanners

GAIN Feeds Business Managers are now using NIR4 Farm scanners which will give an on the spot result for their customers for key parameters for forages such as Grass and Maize Silage and other wet forages including grazed grass. These forage analysis results are used to formulate the optimal overall feeding programme for any group of livestock on farm. Parameters measured include: dry matter, energy, protein and fibre.

Farmer View

Cormac Kelly who is Beef Farmer from Tubber in Offaly gives some insights into his plans for feeding cattle this winter and highlights the importance of soil and silage analysis.

For more beef technical information you can talk to our beef specialists Ross Brady 086 7834252 and Martin Ryan on 086 0473208

First Published 21 November 2016

Tagged with: Beef

Processing