Utilising Slurry for 2nd Cut Silage

fertiliser684384.jpg

When a bad spring has resulted in lighter first cut of grass silage crops, second cut silage yields need to be high to compensate and guarantee enough feed for the winter. As second cut silage is more expensive than first cut making the best use of slurry should be aimed for, to reduce the levels of fertiliser required.

It makes sense to target slurry applications for silage fields as a crop of first cut silage will have removed approximately 16 units of Phosphorous (P) and 100 units of Potassium (K) per acre. If this P and K was not applied earlier in spring then it will need to go out now in order to avoid fertility depletion.

  • For second cut silage the standard recommendation is to apply 80 units per acre of Nitrogen (N), 10 units of P and 60 units of K
  • Thick slurry applied at 2000 gallons per acre will supply the entire P & K requirement
  • A straight N fertiliser to supply the remaining 75 units of N should then be sufficient to meet the full needs of the crop
  • Summer applications of 1000 gallons of cattle slurry typically contain three units N, 5 Units P and 32 units K
  • Application with low emission techniques increases slurry N values by three units / 1000 gallons 

Remember, derogation farms must spread slurry by low emission techniques after 15th July. Following the extreme weather this spring this date was recently extended from the 15th June for 2018 only.

  • Target cool, overcast or misty days for spreading to improve N availability
  • Aim to apply additional P&K for soil fertility build up after second cut silage.

For further info contact your Business Manager or Milk Farm Development Manager.

First Published 14 June 2018

Tagged with: Agribusiness All Beef Co-op Dairy

Processing